Aeromotive 13152 - PLATINUM SERIES FORD RAIL MOUNT REGULATOR Manuel d'utilisateur télécharger pdf

AEROMOTIVE Part # 13102

AND Part # 13103

INSTALLATION INSTRUCTIONS

Patent 393,647

CAUTION:

Installation of this product requires detailed knowledge of automotive

systems and repair procedures. We recommend that this installation be carried

out by a qualified automotive technician.

Installation of this product requires handling of gasoline. Ensure you are

working in a well ventilated area with an approved fire extinguisher nearby.

Extinguish all open flames, prohibit smoking and eliminate all sources of ignition

in the area of the vehicle before proceeding with the installation.

When installing this product, wear eye goggles and other safety apparel as

needed to protect yourself from debris and sprayed gasoline.

WARNING!

The fuel system is under pressure. Do not open the fuel system until the

pressure has been relieved. Refer to the appropriate vehicle service manual for

the procedure and precautions for relieving the fuel system pressure.

NOTE: Testing the enclosed regulator by applying air pressure or vacuum to the vacuum port with a

hand-held pump will yield poor results, due to the slight air leakage through the adjustment screw

threads. This minute leakage, which is typical of all adjustable fuel pressure regulators, does not, in any

way, affect the performance of the regulator.

Aeromotive system components are not legal for sale or use on emission controlled motor vehicles.

The following steps are typical of most installations:

1. Once the engine has been allowed to cool, disconnect the negative battery cable and relieve the fuel

system pressure.

2. Remove any cosmetic covers necessary to allow access to the fuel pressure regulator. Some models

require removal of the intake manifold plenum to install this product. If your vehicle requires removal

of any peripherals, refer to the appropriate vehicle service manual for the procedure for doing so.

3. Remove the vacuum line from the top of the O.E. regulator.

4. Place shop towels around the regulator to catch any gasoline that is spilled during this step of the

installation. Remove the regulator mounting bolts and carefully remove the regulator from the fuel rail.

5. Apply light oil to the o-rings supplied in the Aeromotive package.

6. Install the new Aeromotive regulator using the reverse of the foregoing removal procedure.

1 2 3

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

AEROMOTIVE Part # 13102 AND Part # 13103 INSTALLATION INSTRUCTIONS Patent 393,647 CAUTION: Installation of this product requires detailed knowledg

Page 2 - AEROMOTIVE, INC

Thanks for purchasing another quality product designed, engineered and manufactured in Kansas City, USA! AEROMOTIVE, INC. 7805 Barton Street, Lenexa,

Page 3

Aeromotive, Inc. 7805 Barton Street, Lenexa, KS 66214 Phone: (913) 647-7300 Fax: (913) 647-7207 AEROMOTIVE, INC. LIMITED WARRANTY This Aeromotive

Commentaires sur ces manuels

Pas de commentaire

Aeromotive 13152 - PLATINUM SERIES FORD RAIL MOUNT REGULATOR Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Aeromotive 13152 - PLATINUM SERIES FORD RAIL MOUNT REGULATOR. Aeromotive 13152 - PLATINUM SERIES FORD RAIL MOUNT REGULATOR User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Aeromotive 13152 - PLATINUM SERIES FORD RAIL MOUNT REGULATOR