Aeromotive 13110 - PRO-SERIES EFI REGULATOR Manuel d'utilisateur télécharger pdf

AEROMOTIVE

Part # 13110

INSTALLATION INSTRUCTIONS

CAUTION:

Installation of this product requires detailed knowledge of automotive

systems and repair procedures. We recommend that this installation be carried

out by a qualified automotive technician.

Installation of this product requires handling of gasoline. Ensure you are

working in a well ventilated area with an approved fire extinguisher nearby.

Extinguish all open flames, prohibit smoking and eliminate all sources of ignition

in the area of the vehicle before proceeding with the installation.

When installing this product, wear eye goggles and other safety apparel as

needed to protect yourself from debris and sprayed gasoline.

WARNING!

The fuel system may be under pressure. Do not open the fuel system until

any pressure has been relieved. Refer to the appropriate vehicle service manual

for the procedure and precautions for relieving the fuel system pressure.

NOTE: Testing the enclosed regulator by applying air pressure or vacuum to the vacuum port with a

hand-held pump will yield poor results, due to the slight air leakage through the adjustment screw

threads. This minute leakage, which is typical of all adjustable fuel pressure regulators, does not, in any

way, affect the performance of the regulator.

The enclose Aeromotive regulator utilizes one o-ring sealed AN-10 style inlet port, three o-ring

sealed AN-08 outlet ports and one o-ring sealed AN-10 style bypass; These regulator ports are

NOT PIPE THREAD

and utilize NO THREAD SEALANT. The Boost reference fitting installed in the

regulator cover is a AN-04 style, if your application requires a barbed fitting one is provided for

your convenience.

The enclosed Aeromotive regulator is designed to be used with the Aeromotive “Pro series” fuel

pump(s) Aeromotive P/N 11102.

Aeromotive system components are not legal for sale or use on emission controlled motor vehicles.

The following steps are typical of most installations:

1. Once the engine has been allowed to cool, disconnect the negative battery cable and relieve any fuel system

pressure.

2. Place shop towels around the regulator to catch any gasoline that is spilled during this step of the installation.

Remove any regulator mounting hardware and connecting fuel lines, then carefully remove the regulator.

3. Find a suitable place in the vehicle’s engine compartment to mount the Aeromotive regulator. Using the supplied

mounting bracket as a template, mark the bracket mounting holes and drill to accept a #10 screw.

1 2 3

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

AEROMOTIVE Part # 13110 INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and rep

Page 2 - AEROMOTIVE, INC

Thanks for purchasing another quality product designed, engineered and manufactured in Kansas City, USA! AEROMOTIVE, INC. 7805 Barton Street, Lenexa,

Page 3

Aeromotive, Inc. 7805 Barton Street, Lenexa, KS 66214 Phone: (913) 647-7300 Fax: (913) 647-7207 AEROMOTIVE, INC. LIMITED WARRANTY This Aeromotive

Commentaires sur ces manuels

Pas de commentaire

Aeromotive 13110 - PRO-SERIES EFI REGULATOR Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Aeromotive 13110 - PRO-SERIES EFI REGULATOR. Aeromotive 13110 - PRO-SERIES EFI REGULATOR User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Aeromotive 13110 - PRO-SERIES EFI REGULATOR